Palfinger Loader Cranes
Notice: Undefined variable: out in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 281
PK 36502 High Performance
Powerful performance with low dead weight and high efficiency.
- High value retention thanks to coating technology
- Additional applications due to Power Link Plus
- Maximum utilisation of the working range due to HPSC
- Shorter load cycle times due to High Speed Extention
Max. lifting moment | 34.5 |
Max. lifting capacity | 13200 |
Max. hydraulic outreach | 16.3 |
Max. manual outreach | 23.3 |
Slewing angle | 400° |
Slewing torque | 4.0 |
Stabilizer spread (std) | 6.6 m |
Fitting space required (std) | 1.28 |
Width folded | 2.55 |
Max. operating pressure | 320 |
Pump capacity | 80 - 100 l/min |
Dead weight (std.) | 3800 |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Lifting moment | Outreach | Slewing angle | Slewing torque (mt) | Pressure | Pump capacity (l/min) | Crane Weight | Crane Height | Crane Width | Installation Width | Max stroke lenght | Max lifting capacity | Load vertical | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
A | 32.9 mt | 7.6 m | 400 | 4.0 | 32.0 Mpa | 60-80 | 3800 kg | 2470 mm | 2550 mm | 1280 mm | 7486.95 mm | 12900 kg | 4500 kg |
B | 32.2 mt | 9.6 m | 400 | 4.0 | 32.0 Mpa | 60-80 | 4040 kg | 2470 mm | 2550 mm | 1280 mm | 9459.95 mm | 12600 kg | 3400 kg |
C | 31.5 mt | 11.7 m | 400 | 4.0 | 32.0 Mpa | 60-80 | 4290 kg | 2470 mm | 2550 mm | 1280 mm | 11516.95 mm | 12100 kg | 2600 kg |
D | 30.8 mt | 14.0 m | 400 | 4.0 | 32.0 Mpa | 60-80 | 4530 kg | 2470 mm | 2550 mm | 1280 mm | 13833.95 mm | 11500 kg | 1960 kg |
E | 30.3 mt | 16.3 m | 400 | 4.0 | 32.0 Mpa | 60-80 | 4740 kg | 2470 mm | 2550 mm | 1280 mm | 16153.95 mm | 11000 kg | 1500 kg |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.